General Description
Using BCD process, the AS1636 is designed for high performance latch detection hall effect application, such as transportation, industrial and commercial , medical, home appliances, rotor position sensing, brushless DC motor etc. The hall IC integrated an on-chip hall voltage generator for magnetic sensing, a comparator that amplifiers the hall voltage, hall sensor with dynamic offset cancellation system, an open drain output, and a Schmitt trigger to provide switching hysteresis for noise rejection, reverse protection, and a voltage regulator for operation with supply voltage of 2.5V to 28V.
AS1636 is designed to respond to alternating North and South poles. While the magnetic flux density (B) is larger than operate point (BOP), the output will be turned on (low), the output is held until the magnetic flux density (B) is lower than release point (BRP), then turn off (high).
The device is available in SOT23-3L Package and is rated over the -40°C to 150°C. the package is RoHS compliant.
Features
● Input Voltage Range : 2.5V to 28V
● Reverse Protection voltage: -30V
● Over Voltage Protection: 30V
● Bipolar Latch Operation
● High Performance BCD Process Tech.
● Magnetic Sensitivity (typical) BOP=150Gauss, BRP=-150Gauss
● Open Drain Output
● Output Pin 30V Over Voltage Protection
● Small Solution Size● RoHS Compliant
● SOT23-3L and SIP-3L Packages
● -40℃ to +150 ℃ Temperature Range
Applications
● Automotive, Home appliances, Industrial
● Rotor Position Sensing
● Brushless DC Motor/Fan
● Speed & RPM Sensing
● Tachometer, Counter Pickup
● Motor and Fan Control
● Electronic Window Lift
● Convertible Roof Position● Revolution Counting
● Robotics Control
● Medical Equipment Using Electric Motors
