AS1822
Dual Outputs for both S and N-pole Low Power Hall-Effect Sensor IC
General
Description
Using low power CMOS process, the AS1822 is designed for low power, high performance unipolar detection dual output hall-effect application, such as cover switch,
contactless switch,
solid state switch and lid close sensor etc battery operation. The hall IC integrated an on-chip hall voltage generator for magnetic sensing, a
comparator that amplifiers the
hall voltage, a chopper amplifier, a Schmitt trigger to provide switching hysteresis for noise rejection, and two
complementary output.
The total power consumption of AS1822 is typically less than 0.6uA at
1.8V power supply.
AS1822 is designed to respond to alternating North and South poles. White the magnetic flux density (B) is
larger than operate point (BOP), the output will be turned on (low), the output is held until the magnetic flux density (B) is lower
than release point (BRP),
then turn off
(high).
The device
is available
in DFN1014-4L package
is rated over the -40°C to 125°C. The all packages are RoHS
and Green compliant.
Features
● Input Voltage Range : 1.65V to 5.0V
● Micro-power consumption ideal for battery power applications
● Uniplar Operation, dual output
● Very high sensitivity hall sensor● Low Power CMOS process technology
● Chopper stabilization amplifier stage
● Magnetic Sensitivity (typical) BOPS=65Gauss, BRPS=50Gauss BOPN= -65Gauss, BRPN= -50Gauss
● Good RF noise immunity
● No need pull-up resistor
● Small Solution Size
● RoHS & Green Compliant
● DFN1014-4L Packages
● -40℃ to +125 ℃ Temperature Range
Applications
● Cover switch in clam-shell cellular phones
● Cover switch in Notebook, PC/PAD
● Contact-less switch in consumer products
● Solid State Switch
● Handheld Wireless Handset Awake Switch
● Lid close sensor for battery-powered devise
● Magnet proximity sensor for reed switch replacement in low duty cycle applications
● DV, DSC, and White Goods
